ECO J-BOX A
December 6, 2018
ECO J-BOX R
December 6, 2018
ECO LABELLING
FULLY AUTOMATIC LABELLING STATION
ECO LABELLING is a fully automatic machine developed to attach an adhesive label on the solar panel’s frame side and on the rear side. The labels show the resulting power outputs of the sun simulator. The machine sticks automatically the labels on the PV module.
Description
CHARACTERISTCS:
- Print and apply 2 labels (back&side);
- Max speed 305 mm/s;
- Label width: Min 26mm, Max 107mm;
- Label length: Min 15mm, Max 990mm;
- Mode: Thermal transfer, Direct thermal;
- Automatic loading and unloading of modules;
- Connected to Eco Mes system;
- Low maintenance needed;
- Resolution: 300dpi;
- Pre-alarm end coil;
- Cycle time less than 25 sec/module;
OPTIONALS:
- Different size and quantity of labels;
- Custom label’s application position;
Our technicians and staff of Ecoprogetti srl is at your disposal for any clarification or specific questions about our PV production equipment and for the realization of your specific solution.
Request more information!
You may also like…
-
BUFFER
Modules storage system
-
ECOLAYUP R
XYZ layup robot
-
ECOLAM MAX 10 DS
Laminator double step
-
ECOLAB EL 102 A -103 A
EL tester
