ECOLAM 2500 5 - Laminators - ECOPROGETTI - Specialist in photovoltaic production process
BRIDGE STAIR
August 23, 2021
ECOCUT 20 AP Double
August 29, 2023

ECOLAM 2500 5

ELECTRIC LAMINATOR 5 MODULES/CYCLE

The ECOLAM 2500 5 is our latest laminator, designed for large-panel handling. It represents a significant upgrade in efficiency, size, and technology compared to earlier models in the Ecolam series.
Equipped with state-of-the-art technology, the ECOLAM 2500 5 ensures unparalleled lamination quality.

  • Usable Lamination Area: 7200 x 2500 mm
  • Plate Configuration: 5 plates, each divided into 3 independently controllable zones
  • Temperature Uniformity: +/- 2°C

With independent temperature controls for each zone, the ECOLAM 2500 5 guarantees uniform gel content across the entire module’s surface.

capacity-5-module-for-cycle
suitable-for-glass-glass-modules
Patent pending
Laminator heating
Category:
Description

Go over the blue dots to see more details about ECOLAM 2500 5

OPTION 1: COOLING FAN

OPTION 2: COOLING PRESS
 

BIGGER LAMINATION AREA

Single lamination plate: 2600 x 1450 mm
Recommended lamination area: 2500 x 1350 mm
Total lamination area: 2500 x 7200 mm

BETTER ZONAL TEMPERATURE CONTROL

Higher reactivity of heating system:
faster temperature transients, to follow more
precisely lamination recipe steps over time

LESS MAINTENANCE

The optimizations made on the conveyors and membrane minimize
the amount of encapsulant leakage

TOP PERFORMANCE COOLING FAN

Your panels will go from laminator's temperature to ambient 35°C in less than 8 minutes

EXCELLENT VACUUM QUALITY IN NO TIME

A deep and fast vacuum allows to avoid bubbles inside the panels and to minimize any risk of delamination, thus increasing PV panel expected lifetime

CHARACTERISTICS:

  • 5 modules/cycle
  • Usable area 2500 x 7200 mm
  • Fully electric laminator
  • Suitable for different encapsulants: EVA, POE, PVB, etc…
  • Suitable for Glass+Backsheet, Glass+Glass and ultralight flexible glassless modules
  • Suitable also for colored glasses
  • Active pin lift system can be integrated (ideal for Glass+Glass modules)
  • Quick clamp system for quick membrane change
  • Cooling systems: cooling press or cooling fan
  • Easy recipe management from the PLC
  • High gel content results
  • With external pump housing
  • Final vacuum level less than 1 mbar

Laminator productivity

*Lamination tested on glass-backsheet modules with 3.2mm glass
Modules/cycle 5
EVA 20′ 15 mod/h
EVA 15′ 20 mod/h
EVA 10′ 30 mod/h
* POE 13′ 23 mod/h
* POE 9′ 33 mod/h

MACHINE DETAILS

Temperature range From TA to 180°C
Temperature uniformity +/- 2°C
Max thickness of laminate 25 mm
Operator control Touch screen
Usable area WxL 7200 x 2500 mm

QUICK CHANGE OF THE MEMBRANE

A quick-change system of the silicone membrane with clamps is installed around the external borders of the laminator. The membrane change can be done in less than 20 minutes and the change can be performed with the plates still in working temperature. Long life of the membrane is guaranteed (Min. 3000 cycles).

GREAT VACUUM QUALITY

For the vacuum system the laminator has a booster pump installed under the laminator and an external pump housing that includes a vacuum pump (in case of double chamber) and a special condensation filter. This special filter absorbs the gasses formed during the lamination process in order to not damage the pump and to not let out this gas in the environment.

For inquiries please complete the form below. We value your questions and will respond promptly.

Catalogue
contact_us_caps.png