ECOLAM MAX 3 DS
August 17, 2021
ECOLAM MAX 4 DS
August 17, 2021
ECOLAM MAX 4
4 MODULES LAMINATOR
Automatic laminator for photovoltaic modules complete with load and unload belt. Usable lamination area 5600 x 2300 mm divided in 4 plates which makes the model suitable for high capacity production lines. Each plate is divided in 3 controllable zones. Each zone is heated by electrical elements with an uniformity of +/- 2C°.
The temperatures in each zone are independent to have a uniform gel content over the complete surface of the module. The laminator has a teflon belt which loads and unloads the modules in and out from the laminator and also a teflon sheet which covers the backside of the module during the lamination cycle.
CHARACTERISTICS:
- 4 modules/cycle
- Fully electric laminator
- Usable area: 5600 x 2300 mm (x2 in double step)
- Suitable for different encapsulants: EVA, POE, PVB, etc…
- Suitable for Glass+Backsheet, Glass+Glass and ultralight flexible glassless modules
- Suitable also for colored glasses
- Active pin lift system can be integrated (ideal for Glass+Glass modules)
- Quick clamp system for quick membrane change
- Cooling systems: cooling press or cooling fan
- Easy recipe management from the PLC
- High gel content results
- With external pump housing
- Final vacuum level less than 1 mbar
LAMINATOR PRODUCTIVITY
*Based on data supplied by Tier-1 POE suppliers
| Modules/cycle | 4 |
| EVA 20′ | 12 mod/h |
| EVA 15′ | 16 mod/h |
| EVA 10′ | 24 mod/h |
| * POE 13′ | 19 mod/h |
QUICK CHANGE OF THE MEMBRANE
A quick-change system of the silicone membrane with clamps are installed around the external borders of the laminator. With this system, the membrane change is done in less than 30 minutes and the change can be performed with the plates still in working temperature. Long life of the membrane is guaranteed (Min. 3000 cycles).
For the vacuum system, the laminator has a booster pump installed inside the laminator and an external pump housing that includes a vacuum pump and a special condensation filter. This special filter absorbs the gasses formed during the lamination process in order to not damage the pump and to not let out this gas in the environment.
MACHINE DETAILS
| Temperature range | From TA to 180°C |
| Temperature uniformity | +/- 2°C |
| Max thickness of laminate | 35 mm |
| Operator control | Touch screen |
| Usable area WxL | 5600 x 2300 mm |
Our technicians and staff of Ecoprogetti srl is at your disposal for any clarification or specific questions about our PV production equipment and for the realization of your specific solution.
Request more information!
