HI-POT
October 31, 2016
ECOFRAME HA
October 31, 2016
ECOSUN PLUS
LED-based Sun Simulator, Certified A+A+A++ by TÜV InterCert
The Ecosun Plus is the unbeatable solution with a highly accurate performance for high volume production testing of PV modules, enabling unsurpassed efficiency measurements of solar cells, reducing operating costs over the systems lifetime.
Ecoprogetti’s sun simulator performs I-V curve measurements for all the new generations of solar modules and thanks to a Steady State Irradiance test it works also for all the new high-efficiency solar cells. With the most advanced 18-colour LED-based technology (lifetime equivalent to 10GW of produced modules), the Ecosun Plus can be used for testing both standard crystalline solar modules and CIGS solar modules, with the possibility to perform Light Soaking for Thin-film solar modules as well.
The measurements for testing the efficiency of PV modules and the I-V curve can be performed without wasting time between one test and the other, thanks to the absence of recharging times.
The certified A+A+A++ levels of Spectrum(A+), Non-Uniformity(A+) and Instability(A++) are the most advanced in the market.
CHARACTERISTICS:
- Enhanced spectrum range: from 300 nm to 1200 nm
- Test time range: 100 ms to 5 sec (customizable)
- No recharging time between tests (ideal for high throughput prod. lines)
- Lowest maintenance costs
- Repeatability: 99,80%
- Class A+ Spectrum: AM 1,5
- Class A+ Long term instability: ± 0,125%
- Class A++ Non uniformity: ± 1%
- Illuminated area: 2,2 m x 1,4m (customizable)
- Long pulse capability ideal for high efficiency solar cells (No capacitive effects)
- Suitable for: Mono/Poly, PERC, HJT, HIT, Bifacial, Back contact, Hybrid silicon solar cells and thin-film
- Best performance (spectral, spatial and temporal) compliant to IEC 60904-9 ed.2, ed. 3
OPTIONALS:
- Automatic contact system
- Automatic load/unloading system
- Customized electronic load
- Light soaking capability
- Bigger/smaller illuminated area (active area)
- Extended-spectrum range
- Integration with MES system
- Double light source for Bifacial modules
ELECTRONIC LOAD
| Voltage | 18V-120V (opt: 0-500V)* |
| Current | Current 12A-120A* |
| Max power | 600W |
| Connection | 4wire |
*other ranges on request
ADDITIONAL ITEM
Hi-pot
ISOLATION MEASUREMENT
To guarantee a long life of the photovoltaic module and the safety of the installation, Ecoprogetti offers an instrument which checks the electrical insulation of the modules during the production process in respect of the norm IEC 61215/61730.
The instrument permits to perform the Hi-Pot test with a maximum voltage of 6kV DC.
The technicians and staff of Ecoprogetti srl is at your disposal for any clarification or specific questions about our PV production equipment and for the realization of your specific solution.
Request more information!
You may also like…
-
ECOSUN CELL
LED solar cell tester
-
ECOSUN C
LED sun simulator
-
ECOSUN BIFACIAL
LED sun simulator
-
ECOLAB EL
EL tester
-
ECO HI-POT
Hi-pot tester
-
ECOSUN PLUS A
LED sun simulator
