ARE YOU READY FOR BIGGER SOLAR CELLS?
START PRODUCING THE NEW GENERATION OF PV PANELS WITH M6, M10 AND M12 WAFER SIZES
ECOPROGETTI SRL, DRIVING THE CHANGE OF YOUR PHOTOVOLTAIC MANUFACTURING
Say welcome to a new, exciting era of modules, showing outputs exceeding 600W. We gave a look at the PV panels already being produced with power of 600W and higher and four fundamental characteristics are repeated in all these new super-efficient PV panels, revealing some key technological trends playing a pivotal role in this trasformation.
- Larger sizes of wafers 182mm (M10) and 210mm (M12)
- Predilection of PERC cells (Mono passivated emitter rear cells)
- Half-cut cells, 9, 10, 11 and 12 Bus Bar and Wires
- Centralized interconnections
Fill out the form below and you will soon be contacted by our team.
STANDARD IS NO LONGER A DEFINED SIZE
The entry into the field of larger solar cells (166mm, 182mm, 210mm) was sudden and for many manufacturers of photovoltaic panels it is difficult to upgrade their production in such a short time.
BIGGER SOLAR PANELS
Since half 2020 Ecoprogetti has been offering complete production lines ready to operate with solar cells up to wafer size M12 and consequently also compatible with wider and longer panels.
CELL TO MODULES SIZE COMPARISON
Based on data from February 2021
ECOPROGETTI MACHINES ARE COMPATIBLE WITH MAX MODULE SIZE: 2300 x 1400 mm
PV INDUSTRY ADJUSTMENT TO 166mm, 182mm, 210 mm SOLAR CELLS
For many producers this quick change is a challenge that must be tackled rapidly. As we have already seen happen with M2 cells at some point the price of solar cells will drive the change, forcing manufacturers to choose different solar cells (M10 and M12).
What will the new standard panel size be?
What we are seeing is a movement towards the full, half-cut and third-cut cell versions of the 166 mm and 182 mm. Best arranged with 9-10-11 BB to maximize the performance of the module. For two years Ecoprogetti has invested in the adaptation of all the machines to wider sizes of panels (up to 2.3m x 1.4m) and to be flexible without additional costs. Now we can deliver complete turnkey solutions to assemble PV panels with solar cells from 166 mm to 210 mm (others on request) plus the half cell sizes in each case.
High-speed Stringer IS READY
The Automatic Bussing is ready
Renewed Production lines
The technicians and staff of Ecoprogetti srl are at your disposal for any clarification or specific questions about our PV production equipment and for the realization of your specific solution.
Request more information!